|| Development Platform for LPC2378 With 2.8" TFT Touch Screen
Development Platform for LPC2378 With 2.8" TFT
Blue Screen is a touch screen development board comes with NXPís powerful ARM7 LPC2378, a 2.8-inch TFT LCD with resistive-type-touch screen , micro-SD card socket, and 8kB EEPROM. This product is full of peripheral drivers and advance software modules e.g. screen object manager, command line interface, SPI interface, I2C interface.
Note: As of April 2009, the SD CS pin had changed. Information here.
240x320 pixels TFT LCD with touch screen
NXPís ARM7 LPC2378
Touch screen controller (AD7843) driver
Serial port, SPI interface, and I2C interface
Micro-SD card socket (connected via SPI interface) support up to 2GB capacity (High capacity: ĎHCí type not supported)
On board 8kB EEPROM (the last 128 bytes are reserved for screen calibrated parameters)
1 port ThaiEasyElecís module connector consisting of SPI and UART signals from MCU
UART connector for command line interface and in-system programming (TTL 3.3V with 5V tolerant)
16 ports GPIO
Mini-B USB connector (the board is powered from USB connector) and Includes Mini-B to A USB cable
Also includes CD with most of the documents and software below.
CDROM with documents and software
Blue Screen Users Manual
LCD Datasheet - ELT240320ATP
LCD Driver Datasheet - ILI9325
Blue Screen Schematic
Example Port Connection
Keypad Demo Tutorial
Migrating from ILI9320 to ILI9325
ANBS1.00.06 Eclipse and GNU setup
tambah ongkos shipp cost pajak 1.2jt ke Singapore.
Stock : Ready